Learning how to cut concrete pavers is a skill like any other that can be honed with enough practice and know-how. While cutting concrete pavers is best left to the experts, there are some tips we can share with you to help you out in your next project!
New Life Rockeries takes rockeries and landscaping contractors seriously, so you can trust us when we say that we’re the ideal team to help out with your next yard beautification project.
How to Cut Pavers
When you first learn how to cut pavers, you might say, “Well that seems rather easy.” Cutting pavers is simple in the fundamental sense, it’s a tricky technique to master and do well.
It’s possible to cut concrete pavers by hand or by power tools. Both can ultimately produce the same wonderful result.
Using power tools (such as a circular saw) is the best way to evenly cut concrete pavers. This is particularly helpful if you have multiple pavers.
How to Cut a Concrete Paver by Hand
Don’t have any power tools? You can still cut a concrete paver by hand. Before you commence, here’s what you’ll need:
- Straight edge
- Tape measure
- A good hammer
- Carpenter’s pencil for measuring
- Safety goggles
- Working gloves
- A cold chisel
How to Cut Concrete Pavers with a Circular Saw
Before we get into how to cut cement pavers, we’ll give you your checklist for cutting with a circular saw, too.
- Straight edge
- Carpenter’s pencil for measuring marks
- Tape measure
- Circular saw, masonry saw, or table saw
- Work gloves
- Respirator
- Ear protection
- Eye protection
Step 1: Measuring
Whether you’re going to cut cement pavers by hand or with a saw, the first step is the same. You’ll need to measure out the approximate distance between your stones to determine what size you’ll need.
It helps to write out your project ahead of time on paper to determine your stones’ dimensions!
After you know the dimensions of the necessary stones, take your straight edge and carpenter’s pencil to make the cutting marks on the stone.
Step 2: Cutting the Brick By Hand or Saw
It’s cutting concrete paver time! If you’ve measured out your stones, it’s time to get cutting.
Here are the easy steps you’ll need to get the job done:
- Use your chisel to score the brick
- Chisel along the scored lines with hammer, using even force
- Repeat until the brick breaks perfectly along the line
- If there are rough edges, use your hammer and chisel to clean them up
The steps above are designed to cut cement pavers by hand, but this will work with a saw too. Just swap out your chisel and hammer for a circular saw, and be sure to use the proper protection.
How to Cut Cement Pavers
As you can see, answering the question “How do you cut concrete pavers” is simple in theory, but tricky to master. If you need assistance, we are here for you. Contact us here about your next project!